Advertisement
Keyword
flash
running-config
startup-config
backup-config
image
boot
tftp:
xmodem:
null:
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
•
The location of a file system dictates the format of the source or destination URL.
•
The entire copying process may take several minutes and differs from protocol to protocol
and from network to network.
•
To use xmodem as the source, the following must be performed:
Ensure the current is already at the DRAC/MC CLI command prompt , if not, then
a
switch back to the context of the DRAC/MC CLI command prompt by pressing the
following sequence of keys: "<Enter>~."; that is, first press <Enter>, then press on tilde
"~" (remember to depress the <Shift> key if the tilde character is located in the upper
register of your keyboard) and then press period (dot) "."
At the command prompt of the DRAC/MC, issue the following command:
b
racadm config -g cfgSerial -o cfgSerialConsoleIdleTimeout
0x3000
90
Configuration and Image Files
Description
Source or destination URL for Flash memory. It's the default in case a
URL is specified without a prefix. The syntax is flash://startup-config,
"flash://image".
Represents the current running configuration file.
Represents the startup configuration file.
Represents the backup configuration file.
If source file, represent the active image file. If destination file, represent
the non-active image file.
Boot file.
Source or destination URL for a TFTP network server. The syntax for
this alias is tftp://host/[directory]/filename. The host can be either IP
address or hostname.
Source for the file from a serial connection that uses the Xmodem
protocol.
Null destination for copies or files. A remote file can be copied to null to
determine its size.
Advertisement
