Advertisement
EapolStartFramesRx
EapolLogoffFramesRx
EapolRespIdFramesRx
EapolRespFramesRx
EapolReqIdFramesTx
EapolReqFramesTx
InvalidEapolFramesRx
EapLengthErrorFramesRx
LastEapolFrameVersion
LastEapolFrameSource
ADVANCED FEATURES
NOTE:
dot1x auth-not-req
The dot1x auth-not-req VLAN Configuration mode command enables unauthorized users access
to that VLAN. Use the no form of this command to disable the access.
Syntax
dot1x auth-not-req
no dot1x auth-not-req
Default Configuration
User should be authorized to access the VLAN.
Command Mode
Interface (VLAN) Configuration mode
354
802.1x Commands
The number of EAPOL Start frames that have been received by this
Authenticator.
The number of EAPOL Logoff frames that have been received by this
Authenticator.
The number of EAP Resp/Id frames that have been received by this
Authenticator.
The number of valid EAP Response frames (other than Resp/Id frames)
that have been received by this Authenticator.
The number of EAP Req/Id frames that have been transmitted by this
Authenticator.
The number of EAP Request frames (other than Rq/Id frames) that have
been transmitted by this Authenticator.
The number of EAPOL frames that have been received by this
Authenticator in which the frame type is not recognized.
The number of EAPOL frames that have been received by this
Authenticator in which the Packet Body Length field is invalid.
The protocol version number carried in the most recently received
EAPOL frame.
The source MAC address carried in the most recently received EAPOL
frame.
Some of the commands included in this group may have implications on internal ports.
Advertisement
