Advertisement
switchport general map protocols-group vlan
The switchport general map protocols-group vlan Interface Configuration mode command sets a
protocol-based classification rule. To delete a classification, use the no form of this command.
Syntax
switchport general map protocols-group group vlan vlan-id
no switchport general map protocols-group group
•
group — Group number as defined in the map protocol protocols-group command.
(Range: 1 - 2147483647)
•
vlan-id — Define the VLAN ID in the classifying rule.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets a protocol-based classification rule of protocol group 1 to VLAN 8.
console(config)# interface ethernet g16
console(config-if)# switchport general map protocols-group 1 vlan
8
show vlan
The show vlan Privileged EXEC mode command displays VLAN information.
Syntax
show vlan [tag vlan-id | name vlan-name | internal]
•
vlan-id — A valid VLAN ID
•
vlan-name — A valid VLAN name string. (Range: 1 - 32 characters)
•
internal — Indicates that internal VLAN usage is displayed.
Default Configuration
This command has no default configuration.
324
VLAN Commands
Advertisement
