Default Configuration
Uses the default set with the command authentication login.
Command Mode
Line Configuration mode
User Guidelines
•
Changing login authentication from default to another value may disconnect the telnet
session.
Example
The following example specifies the default authentication method for a console.
console(config)# line console
console(config-line)# login authentication default
enable authentication
The enable authentication Line Configuration mode command specifies the authentication
method list when accessing a higher privilege level from a remote telnet, SSH or console. To return
to the default specified by the enable authentication command, use the no form of this command.
Syntax
enable authentication {default | list-name}
no enable authentication
•
default — Uses the default list created with the authentication enable command.
•
list-name — Uses the indicated list created with the authentication enable command.
Default Configuration
Uses the default set with the command authentication enable.
Command Mode
Line Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the default authentication method when accessing a higher
privilege level from a console.
50
AAA Commands