User Guidelines
There are no user guidelines for this command. However, specifying 0 as the port number will
effectively disable HTTP access to the Ethernet Switch Module.
Example
The following example shows how the http port number is configured to 100.
console(config)# ip http port 100
ip https server
The ip https server Global Configuration mode command enables the Ethernet Switch Module to
be configured from a secured browser. To disable this function, use the no form of this command.
Syntax
ip https server
no ip https server
Default Configuration
The default for the Ethernet Switch Module is disabled.
Command Mode
Global Configuration mode
User Guidelines
•
You must use the crypto certificate generate command to generate the HTTPS certificate.
Example
The following example enables the Ethernet Switch Module to be configured from a browser.
console(config)# ip https server
ip https port
The ip https port Global Configuration mode command specifies which TCP port the server uses
to configure the Ethernet Switch Module through the web browser. To use the default port, use the
no form of this command.
Syntax
ip https port port-number
no ip https port
•
port-number — Port number for use by the HTTP server. (Range: 0 - 65535)
330
Web Server