Advertisement
Description
Type
Community
Owner
Last time sent
show rmon log
The show rmon log User EXEC mode command displays the RMON logging table.
Syntax
show rmon log [event]
•
event — Event index. (Range: 0 - 65535)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the RMON logging table.
console> show rmon log
Maximum table size: 500
Event
-------
1
1
2
216
RMON Commands
A comment describing this event.
The type of notification that the Ethernet Switch Module generates about this
event. Can have the following values: none, log, trap, log-trap. In the case of log,
an entry is made in the log table for each event. In the case of trap, an SNMP trap
is sent to one or more management stations.
If an SNMP trap is to be sent, it is sent to the SNMP community specified by this
octet string.
The entity that configured this event.
The time this entry last generated an event. If this entry has not generated any
events, this value is zero.
Description
--------------
Errors
Errors
High Broadcast
Time
---------
Jan 18 2002 23:48:19
Jan 18 2002 23:58:17
Jan 18 2002 23:59:48
Advertisement
