Advertisement
Command Mode
Privileged EXEC mode
User Guidelines
•
There are no user guidelines for this command.
Example
The following example displays the SNMP communications status.
console# sh snmp
.
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Target
Type
Address
Version 3 notifications
Target
Type
Address
System Contact:
System Location:
console#
show snmp views
To display the configuration of views use the show snmp views Privileged EXEC command
Syntax
show snmp views [viewname]
•
viewname— The name of the view. Range: Up to 30 characters
Communit
Version
y
Username
Secu-
rity
Level
UDP Port
Filter
name
UDP Port
Filter
name
SNMP Commands
TO sec
Retrie
s
TO sec
Retrie
s
233
Advertisement
