Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command is only functional on the external port g11-g16.
Example
The following example configures the priority value for port g16 to 247.
console(config)# interface ethernet g16
console(config-if)# lacp port-priority 247
lacp timeout
The lacp timeout Interface Configuration (Ethernet) mode command assigns an administrative
LACP timeout. To reset the default administrative LACP timeout, use the no form of this
command.
Syntax
lacp timeout {long | short}
no lacp timeout
•
long — Specifies a long timeout value.
short — Specifies a short timeout value.
•
Default Configuration
The default port timeout value is long.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example assigns an administrative LACP timeout for port g16 to a long timeout
value.
console(config)# interface ethernet g16
console(config-if)# lacp timeout long
150
LACP Commands