Advertisement
User Interface
enable
The enable User EXEC mode command enters the Privileged EXEC mode.
Syntax
enable [privilege-level]
•
privilege-level — Privilege level to enter the system. (Range: 1 - 15)
Default Configuration
The default privilege level is 15.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how to enter Privileged EXEC mode:
console> enable
enter password:
console#
disable
The disable Privileged EXEC mode command returns to User EXEC mode.
Syntax
disable [privilege-level]
•
privilege-level — Privilege level to enter the system. (Range: 1 - 15)
Default Configuration
The default privilege level is 1.
Command Mode
Privileged EXEC mode
27
303
User Interface
Advertisement
