Advertisement
Example
In the following example Back Pressure is enabled on port g15.
console(config)# interface ethernet g15
console(config-if)# back-pressure
port jumbo-frame
The port jumbo-frame Global Configuration mode command enables jumbo frames for the
Ethernet Switch Module. The size of the port jumbo frame is up to 10K. To disable jumbo frames,
use the no form of this command.
Syntax
port jumbo-frame
no port jumbo-frame
Default Configuration
Jumbo Frames are not enabled.
Command Mode
Global Configuration mode
User Guidelines
•
The command would be effective only after reset.
Example
In the following example, Jumbo Frames are enabled on the Ethernet Switch Module.
console(config)# port jumbo-frame
clear counters
The clear counters User EXEC mode command clears statistics on an interface.
Syntax
clear counters [ethernet interface | port-channel port-channel-number]
•
interface — Valid Ethernet port.
•
port-channel-number — Valid port-channel index.
Default Configuration
This command has no default configuration.
106
Ethernet Configuration Commands
Advertisement
