The following example re-enables port g15.
console(config)# interface ethernet g15
console(config-if)# no shutdown
description
The description Interface Configuration (Ethernet, port-channel) mode command adds a
description to an interface. To remove the description, use the no form of this command.
Syntax
description string
no description
•
string — Comment or a description of the port up to 64 characters.
Default Configuration
By default, the interface does not have a description.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example adds a description to port g15.
console(config)# interface ethernet g15
console(config-if)# description "RD SW#3"
speed
The speed Interface Configuration (Ethernet, port-channel) mode command configures the speed
of a given Ethernet interface when not using auto-negotiation. To restore the default, use the no
form of this command.
Syntax
speed {10 | 100 | 1000}
no speed
•
10 — Configure 10 Mbps operation.
Ethernet Configuration Commands
101