Meas; Clear; Print - Rigol DS6000 Series User Manual

RIGOL

MEAS

Press this key to enter the measurement menu which supports
measurement parameter setting, all measure, statistic analysis and
counter. Press MENU at the left of the screen to quickly turn on the
selecting menu of the 29 measurement parameters and easily
realize "one-key" measurement of the common parameters.

Clear

Press this key to clear all the waveforms on the screen. If the
oscilloscope is in "Run" state, new waveforms will still be displayed.

Print

Press this key to execute the print function or save the content
displayed on the screen in a USB storage device. If the
oscilloscope is currently connected to a printer (PictBridge or
normal printer) and the printer is in idle state, pressing this key will
execute the print function. If no printer but a USB storage device is
currently connected, pressing this key will save the content
displayed on the screen to the USB storage device in the specified
format (press SAVE  Storage to select "Picture"; then, press
Pic Type to select "bmp", "png", "jpeg" or "tiff" and the default is
"png"). When printer and USB storage device are connected at the
same time, the printer enjoys higher priority.
1-26
1 Quick Start
DS6000 User's Guide