Multifunction Knob; Navigation Knob - Rigol DS6000 Series User Manual

RIGOL

Multifunction Knob

Navigation Knob

For example, this knob can be used to quickly locate the waveform frame to be
played back (CurFrame menu) in the waveform playback. Similar parameters
include trigger holdoff, pulse width setting, slope time and etc.
1-24
Adjust waveform brightness:
In non-menu-operation mode (the menu is hidden), turn
this knob to adjust the brightness of waveform display.
The adjustable range of the brightness is from 0% to
100%. Turn clockwise to increase the brightness and
counterclockwise to reduce. Press down this knob to
reset the brightness to 50%.
You can also press DISP  WaveIntensity and use
the knob to adjust the waveform brightness.
Multifunction Knob (the backlight goes on during
operation):
In menu operation, for menu that includes multiple
parameter items, press the corresponding menu softkey
and turn the knob to select the specified parameter item
(sometimes you need to press down the knob to select
the parameter item). It can also be used to modify
parameters and input filename.
This knob provides quick Adjust/Locate function
for numerical parameters with relatively large
settable range. Turn clockwise
(counter-clockwise) to increase (reduce) the
value. The inner knob is used for fine adjustment
and the outer knob for coarse adjustment. The
change rate of the value depends on the rotation
amplitude of the outer knob.
1 Quick Start
DS6000 User's Guide