Math Operation; Addition; Subtraction - Rigol DS2000E Series User Manual

RIGOL

Math Operation

DS2000E can realize various math operations (including: addition (A+B), subtraction
(A-B), multiplication (AxB), division (A÷B), FFT, digital filter, logic operation and
advanced operation) of waveforms between channels. The results of math operation
also allow further measurement.
Press MATH  Operate in the vertical control area (VERTICAL) on the front panel
to select the desired operation function. The result of math operation is displayed on
the waveform marked with "M" on the screen.

Addition

Add the waveform voltage values of signal source A and B point by point and display
the results. Press MATH  Operate to select "A+B":
Press Source A and Source B respectively to select the desired channels (CH1

or CH2).
Press and use

Press and use

Press Invert to turn the inverted display of the operation results on or off.

Press Label to define a label for the operation results. For the details, please

refer to "MATH Label".
HORIZONTAL

used to adjust the horizontal position and scale of the operation results.

Subtraction

Subtract the waveform voltage values of signal source B from that of source A point
by point and display the results. Press MATH  Operate to select "A-B":
Press Source A and Source B respectively to select the desired channels (CH1

or CH2).
Press and use

Press and use

Press Invert to turn the inverted display of the operation results on or off.

6-2
to adjust the vertical position of the operation results.
to adjust the vertical scale of the operation results.
POSITION and HORIZONTAL
to adjust the vertical position of the operation results.
to adjust the vertical scale of the operation results.
Chapter 6 MATH and Measurements
SCALE can also be
DS2000E User's Guide