You can specify the following fields for a sort key of the SORT command:
Name of field
CU
CCA
DEVN
VOLSER
You can specify the following fields for a condition of the SELECT command:
Name of field
CU
CCA
DEVN
VOLSER
Sort the Define Command Device Panel
If you press the F6=Sort key in the Define Command Device panel, the Sort the Define Command
Device panel appears. In this panel, you can specify a sort key.
Figure 38 Sort the Define Command Device Panel
Table 27 Select the Sort Key for the Sort the Define Command Device Panel
Item
CU
CCA
Device Number
Volume Serial Number
Define Remote Command Device Panel
If e is specified in the Command Device Information panel for a storage system for which 2 was
specified in the selection field of the Add Route Entry panel or Edit Route Entry panel, the Define
Remote Command Device panel appears.
In the panel, you can specify the SSID, CU, and CCA information to specify the device to be
defined as the command device.
Figure 39 (page 51)
50
ISPF Panels
Sorted by
Number of the control unit to which the command device belongs
Command control address of the command device
Device number of the command device
Volume serial number of the command device
Value in field
Number of the control unit to which the command device
belongs
Command control address of the command device
Device number of the command device
Volume serial number of the command device
Sorted by
Number of the CU to which the command device belongs
CCA of the command device
Device number of the command device
Volume serial number of the command device
shows the panel.
Direction
Ascending
Ascending
Ascending
Ascending
Type
Hexadecimal
Hexadecimal
Hexadecimal
Character string