HP XP P9500 Reference Manual page 167

Table 83 Contents of the Path Set Status of Copy Group Pair Panel
Item
Copy Group ID
AC
Type
Primary Serial#
PathID
CU
SSID
Dir
Secondary Serial#
PathID
CU
SSID
Status
The path information displayed in the Path Set Status of Copy Group Pair panel differs depending
on the copy type:
When the copy type is CA/CAA, path information for the inter-control unit logical path in the
copy direction is displayed
When the copy type is CAJ, path information for the bidirectional inter-disk controller logical
path is displayed.
When the copy type is BC, no path information is displayed.
The execution result of the YKQRYDEV command with the PATH parameter specified is displayed
in the RC column in the Copy Group Pair Status panel.
Pair Status panel" (page 167)
panel.
Table 84 Return codes displayed in the Copy Group Pair Status panel
Return Code
00
Description
Copy group ID
Specify an action.
s: Displays the Logical Path Status of Copy Group Pair panel used to
display the status of physical paths in the logical path.
Path type
CU: Inter-control unit logical path
DKC: Inter-disk controller logical path
Serial number of the primary storage system
Primary path ID
When the path type is CU, nothing is displayed.
Primary control unit number
Primary SSID
Path direction
Serial number of the secondary disk controller
Secondary path ID
When the path type is CU, nothing is displayed.
Secondary control unit number
Secondary SSID
Status of the logical path used by the copy pair
ESTABLISHED n/n PORT(S): All defined physical paths have been
established (where n indicates the number of defined physical paths).
ESTABLISHED m/n PORT(S): Among all of the physical paths defined
by the hardware, only those established are displayed (where m indicates
the number of physical paths in the ESTABLISHED status, and n indicates
the number of defined physical paths).
INVALID: An error has occurred on a physical path.
describes the return codes displayed in the Copy Group Pair Status
Meaning
Successful completion.
" Return codes displayed in the Copy Group
Manage Copy Groups Panel (Copy Group Operation) 167