Ykewait Command - HP XP P9500 Reference Manual

MSG(stem-name-2) ~ <REXX prefix of 64 or fewer characters>
Specify an optional prefix for the name of the message structure used to store the messages to be
generated by this command. You must also include a trailing period character.
The message structure is initialized when the CLI command with the same name as the MSG
parameter is specified.
GOTO({DUPLEX|SUSPEND|SIMPLEX|SUSPVS|HOLD|SWAPPING})
Specify the status of the copy group to be monitored. When all the copy pairs in the group change
to the specified status, the YKEWAIT command terminates successfully.
DUPLEX
The command waits until all the copy pairs in the group reach the DUPLEX status. However, if the
status of any copy pair changes to the SIMPLEX, SUSPCU, SUSPER, TRANS, SUSPVS, HOLDER,
NODELTA, CONSLOST, or INVALID status, the YKEWAIT command terminates abnormally with
return code 8.
When the command waits for copy pairs in the CG container specified by EXCTG ID to reach the
DUPLEX status, it first waits for all journal groups in the CG container specified by EXCTG ID to
be registered in EXCTG. If an error is detected during EXCTG registration, the YKZ297E message
is output and the command terminates abnormally with return code 44.
SUSPEND
The command waits until all the copy pairs in the group reach the SUSPOP or SWAPPING status.
However, if the status of any copy pair changes to the SIMPLEX, SUSPER, SUSPCU, HOLD, HOLDER,
HOLDTRNS, NODELTA, CONSLOST, or INVALID status, the YKEWAIT command terminates
abnormally with return code 8.
SIMPLEX
The command waits until all the copy pairs in the group reach the SIMPLEX status. However, if the
status of any copy pair changes to the SUSPER, SUSPCU, HOLDER, CONSLOST, or INVALID status,
the YKEWAIT command terminates abnormally with return code 8.
SUSPVS
The command waits until all copy pairs in the group reach the SUSPOP or SUSPVS status. However,
if the status of any copy pair changes to the SUSPER, SIMPLEX, SUSPCU, HOLD, HOLDER,
HOLDTRNS, NODELTA, CONSLOST, or INVALID status, the YKEWAIT command terminates
abnormally with return code 8.
HOLD
Applies to Continuous Access Journal for Mainframe
The command waits for all copy pairs in the group to reach the HOLD status. However, if any copy
pair takes the SIMPLEX, SUSPER, SUSPCU, HOLDER, NODELTA, or INVALID status, the YKEWAIT
command terminates abnormally with return code 8. In rare cases, delta resync pairs might stay
in HOLDTRNS status. If this occurs, the YKEWAIT command does not terminate until the time
specified by TIMEOUT parameter elapses.
In the Copy Group Status Summary panel, the number of copy pairs in the HOLD status is included
in the displayed number of pairs in the SUSPOP status. In the Copy Group System Summary panel,
the number of pairs in the HOLD status is included in the displayed number of pairs in the SUSPOP
status.
206 CLI Commands