HP XP P9500 Reference Manual page 134

Table 74 Contents of the Volume Query Information (BC) Panel (continued)
Item
C/T ID
PROT MODE
COPY PACE
GEN ID
Other CopyPair
5
Information
134 ISPF Panels
Primary/Secondary Type
C/T ID
Description
◦
MM: Minutes are displayed.
◦
SS.NNNNNN: Seconds are displayed.
UNEXPECTED: When the BC copy pair was
suspended, some CAJ copy pairs were not
in DUPLEX status.
ERROR(0001): Since the BC copy pair
status is invalid, suspend processing for the
BC copy pair was abnormally terminated.
ERROR(0002): Since a storage
system-derived error occurred, suspend
processing for the BC copy pair was
abnormally terminated. Contact the storage
administrator.
N/A: One of the following conditions
applies:
◦
The CAJ ATTIME suspend function is not
used.
◦
Suspension of the BC copy pair has not
started.
◦
The BC copy pair has been suspended.
Consistency group ID
4
Write-protect for the S-VOL
PROTECT: Update of the S-VOL is
prohibited after the copy pair is suspended
(YKSUSPND command is executed).
PERMIT: Update of the S-VOL is allowed
after the copy pair is suspended
(YKSUSPND command is executed).
4, 1
Pace of copying
NORMAL: The speed of the copy operation
improves. However, update I/O load on
P-VOL is high, and this might affect the I/O
performance of the host.
SLOW: Slows the speed of the copy
operation so that the effect of the copy
operation on the I/O performance of the
host is minimal.
Generation ID
The following information is displayed if there
are any other copy pairs apart from the one
specified in the Copy Group Pair Status panel:
Copy type
Indication of whether it is information on
the P-VOL or S-VOL (Pri or Sec)
Consistency group ID and subconsistency
group ID