Copy Group Pair Status Panel - HP XP P9500 Reference Manual

Item
5. Transfer Rate(M-JNL->R-JNL KBytes/s)
6. JNL-Vol Usage Rate for M-Metadata
7. JNL-Vol Usage Rate for R-Metadata
8. JNL-Vol Usage Rate for M-JNL Data
9. JNL-Vol Usage Rate for R-JNL Data
10. Data capacity in the M-JNL volume (GB)
1 1. Data capacity in the R-JNL volume (GB)

Copy Group Pair Status Panel

The status of each copy pair is displayed when the F6=Pairs key is pressed in the Copy Group
Status Summary panel.
Figure 105 (page 127)
Figure 105 Copy Group Pair Status Panel
"Contents of the Copy Group Pair Status Panel" (page 127)
Pair Status panel.
Table 72 Contents of the Copy Group Pair Status Panel
Item
Copy Group ID
Description
Status Time
AC
Sort Order
In order of the data transfer rates between Pri-SN and Sec-SN
(KB/s)
Metadata usage rate of the journal group for Pri-SN
Metadata usage rate of the journal group for Sec-SN
Journal data usage rate of the journal group for Pri-SN
Jounal data usage rate of the journal group for Sec-SN
In order of the available capacity of journal data for Pri-SN
(in GB)
In order of the available capacity of journal data for Sec-SN
(in GB)
shows the Copy Group Pair Status panel.
Description
Copy group ID
A description of the copy group
The item corresponding to the displayed status time
Specify an action. The following commands can be executed for individual
copy pairs:
q: Executes the YKQRYDEV command to display the copy pair volume
status.
m: Executes the YKMAKE command to create copy pairs. See
YKMAKE" (page 154).
u: Executes the YKSUSPND command to suspend copy pairs. See
"Executing YKSUSPND" (page
r: Executes the YKRESYNC command to re-synchronize copy pairs. See
"Executing YKRESYNC" (page
describes the items in the Copy Group
155).
160).
Manage Copy Groups Panel (Copy Group Operation) 127
"Executing