Ispf Settings; Setting The Position Of The Command Line; Setting The Number Of Pf Keys That Are Displayed; Setting - HP XP P9500 Reference Manual

Table 2 Commands that Can Be Used on the Command Line (continued)
Panel Name
Exception Message Panel
Manage Copy Groups
Pair Selection List (Primary)
Pair Selection List (Secondary)
Path Set Detail
Path Set Status
Path Set Status of Copy Group Pair
Route Status
Setting Information
Hitachi TrueCopy™ Asynchronous
for Mainframe Copy Group
Performance Statistics
Continuous Access Journal for
Mainframe Copy Group
Performance Statistics
Others
1
This command can be used, but you cannot specify field names.
2
Pressing the F5=ErrCode key will also execute the command.
Legend:
Y: Can be used
—: Cannot be used

ISPF Settings

Setting the Position of the Command Line

You can specify whether to position the command line at the top or at the bottom of each panel.
To set the position of the command line:
1. Start Business Continuity Manager. Type SETTINGS on the command line, and then press
the Enter key.
The ISPF Settings panel appears.
2. To display the command line at the top of panels, clear the Command line at bottom check
box. To display the command line at the bottom of panels, select the Command line at bottom
check box.

Setting the Number of PF Keys that are Displayed

You can set the number of PF keys that are displayed. This setting is saved in the profile even after
Business Continuity Manager is stopped
To set the number of PF keys that are displayed:
14 ISPF Panels
Command Name
LOCATE SELECT
— —
Y Y
— Y
— Y
— —
— —
— —
— Y
— —
Y —
Y —
— —
SORT SCANPAIR
— —
Y —
— —
— —
1
Y —
1
Y —
1
Y —
— —
— —
Y —
Y —
— —
ERRCODE
2
Y
Y
Y
Y
Y
Y
Y
Y
—
Y
Y
Y