HP XP P9500 Reference Manual page 257

SUSPEND
The command waits until all the copy pairs in the group reach the SUSPOP status. However, if the
status of any copy pair changes to a status other than a suspend status (SUSPOP, SUSPCU, or
SUSPER) or TRANS, the YKWATCH command terminates abnormally with return code 8.
SIMPLEX
The command waits until the copy pairs reach the SIMPLEX status. When any copy pair takes a
status other than SIMPLEX, however, the YKWATCH command terminates abnormally with the return
code 8.
TIMEOUT(timeout-value) ~ <numeric characters> ((1 to 16666666))
Specify a timeout value. After the time specified with this value has elapsed, the YKWATCH command
terminates abnormally with the return code 4.
DAD(dad-id) ~ <DAD string>
Specify the current host DAD ID.
Maximum length that can actually be specified = 44 - (13 + PREFIX-length)
USER({user-id|*}) ~ <User ID string (for user ID)>
Specifies the terminal to which messages issued by the YKWATCH command are transmitted.
user-id
Transmits the messages to the terminal with the user ID specified in the parameter.
*
Transmits the messages to the terminal of the user executing the script.
OPERATOR(route-code) ~ <numeric characters> ((0 to 127))
Transmits the messages issued by the YKWATCH command to the operator with the address code
specified in the parameter.
CN({console-id|console-name INTERNAL}) ~ <numeric characters> ((0 to 99)) (for a
console ID) or <console name string from 2 to 8 characters> (for a console name)
Specifies in which of the operator console queues the messages issued by the YKWATCH command
are placed.
console-id
Places the messages in the operator console queue with the console ID specified in the parameter.
console-name
Places the messages in the operator console queue with the console ID specified in the parameter.
INTERNAL
Sends the messages to the active console in which INTIDS=Y is defined.
Command details 257