Ykercode Command - HP XP P9500 Reference Manual

Table 104 Items Output by the YKENV Command (continued)
Output item
&YKLOGPT =
SYSLOG =
&YKSYSLG =
Output example
The following is an output example of the YKENV command:
HP P9000 for Business Continuity Manager Software
BC Manager environment variables (6.5.0-00(01))
Host ID: 00
License info DSN prefix: HP
BCM log output method: LOGR
CLI log output settings: YES
YKCMDIF = N/A
YKLCNSE = N/A
YKLCNS2 = N/A
LOGPUT = N/A
SYSLOG = N/A
YKZ371I YKENV command return code=0.

YKERCODE Command

Format
YKERCODE
error-code
1
Function
This is a TSO/E command.
This command displays the details of a specified error code on the TSO/E terminal.
The command displays the following information:
Error details:details-of-error
Displays the error details.
Type of error:cause-of-error
Displays the cause of the error. Possible choices are: BC, CA, CAA, CAJ, CMD (command
device), PATH (logical path), or Others (other).
Parameters
error-code ~ <4 hexadecimal characters>
Specify the storage system sense byte information (error code) that is included in the message
displayed by Business Continuity Manager. For details on error codes, see the section that describes
storage system sense byte information in the HP P9000 for Business Continuity Manager Software
Messages.
Example
The following shows an example of executing the YKERCODE command.
204 CLI Commands
(&YKCMDIF = N/A
(&YKLCNSE = N/A
(&YKLCNS2 = N/A
(&YKLOGPT = N/A
(&YKSYSLG = N/A
Description
Value of the system symbol &YKLOGPT. If &YKLOGPT is
not set, N/A is displayed.
Value of the Business Continuity Manager environment
variable SYSLOG, which was set by the YKSETENV
command. If SYSLOG is not set, N/A is displayed.
Value of the system symbol &YKSYSLG. If &YKSYSLG is
not set, N/A is displayed.
)
)
)
)
)