Path Set Structure - HP XP P9500 Reference Manual

Table 145 Device Information Structure (continued)
REXX variables
PSN Info
PhysicalSerialNum
LDKCNum
1
When the information is acquired, Valid is stored.
2
For Non Gen'ed volumes or remote storage system volumes, information cannot be obtained for
the following storage system models:
XP12000/XP10000 Disk Array
XP24000/XP20000 Disk Array
P9500 Disk Array
3
Information can be acquired for the following models:
HP XP12000/XP10000 Disk Array
HP XP24000/XP20000 Disk Array
HP P9500 Disk Array
4
When the emulation type of the journal volume is OPEN-V, NORMAL is displayed.
5
Information can be acquired for CA.
6
Information can be acquired for TCA.
7
This value is invalid for a PPRC copy pair.
8
Information can be acquired for CA with consistency group ID specified.
9
Displayed in GMT.
10
Information can be acquired for P-VOL when the status for the Continuous Access Journal copy
pair is PENDING or DUPLEX.
1 1
When the copy type is CAJ, and the following models supports the relevant attribute settings,
information is displayed.
HP XP12000/XP10000 Disk Array
HP XP24000/XP20000 Disk Array
HP P9500 Disk Array
When information could not be acquired, the value becomes null.
12
Information can be acquired for HP XP24000/XP20000 Disk Array and P9500 Disk Array.

Path Set Structure

Table 146 (page 342)
is stem-name-specified-in-STEM-parameter and PATH.
NOTE: You can use the YKDROP command to drop the REXX variables in any path set structure
that was loaded by using the YKLOAD command.
Each variable is preceded by a period (.).
1
12
12
shows the path set structure. Prefixes for the name of the path set structure
Description
Target port number
Sec.Port
Existence of PSN information (Valid)
Physical DKC serial number
Logical DKC number
About REXX Variable Structures 341