HP XP P9500 Reference Manual page 221

This parameter should be specified in the following cases:
When using the Cnt-Ac S Z Consistency Preservation function
When the Remote DKC Control function is used.
route-list-ID ~ <ROUTE character string of eight or fewer characters>
Specify the route list ID.
{route-label|*} ~ <ROUTELABEL character string of eight or fewer characters>
When you specify a route label, the information about the command devices with
the specified route label is loaded.
If * is specified, the information for all command devices is loaded regardless of
whether they have a route label.
If both the route label and * are omitted, the information about the command devices
with no route label is loaded.
PATH(path-set-ID) ~ <dataset prefix of 40 or fewer characters>
When you are loading a path set, specify the string obtained by removing the
path-set-ID-specified-in-PREFIX-parameter.PATH. portion from the path set definition file name.
MSG(stem-name-2) ~ <REXX prefix of 64 or fewer characters>
Specify an optional prefix for the name of the message structure used to store the messages to be
generated by this command. You must also include a trailing period character.
The message structure is initialized when the CLI command with the same name as the MSG
parameter is called.
Command details 221