HP XP P9500 Reference Manual page 105

Figure 89 Manage Path Set Panel
Pressing the F1 1=NextInfo key displays Description. Pressing the F10=PrevInfo key returns to the
previous display.
Figure 90 (page 105) shows the Manage Path Set panel displayed when the F1 1=NextInfo key is
pressed.
Figure 90 Manage Path Set Description Panel
Table 62 (page 105) describes the items in the Manage Path Set panel.
Table 62 Contents of the Manage Path Set Panel
Item Description
AC Specify an action.
l: Executes the YKLOAD command and loads a path set.
b: Executes the YKBLDPTH command, and establishes all logical paths in the selected
path set.
d: Executes the YKBLDPTH command, and deletes all logical paths in the selected
path set.
q: Executes the YKQRYPTH command, and displays the status of all logical paths in
the selected path set. The Path Set Status panel will be displayed.
c: Executes the YKQRYPTH command with the RESTRUCT parameter specified.
When actions are entered in multiple AC columns, the actions are carried out in the order
displayed.
Path Set ID Path set ID
Status Execution result of the action specified for AC
NOT LOADED: the path set has not been loaded.
LOAD ERROR RC=xx
LOADED WITH WARNINGS RC=xx: The path set has not been loaded, but with
warnings.
1
: An error occurred during loading the path set.
Manage Path Set Panel (Logical Path Management) 105