Ykdemo10 - HP XP P9500 Reference Manual
Hp p9000 for business continuity manager software reference guide
Hide thumbs
Also See for XP P9500:
- Software user's manual (608 pages) ,
- Manual (348 pages) ,
- User manual (193 pages)
Advertisement
* Check the return code of YKEWAIT.
*/
if rc /= 0
then do
call printErrorMessage
exit
end
else
nop
say "#-- END YKDEMO09."
exit
/*
* printErrorMessage: This procedure prints all of the error messages
*
in the Message structure when a CLI command failed.
*/
printErrorMessage: procedure expose DEMO_MSG.
do x = 1 to DEMO_MSG.0
say "Severity = " || DEMO_MSG.x.Severity
say "Text
say "Value
end
return 0
YKDEMO10
/* REXX
/**********************************************************************/
/*
/* All Rights Reserved. Copyright (C) 2009, 2010, Hitachi, Ltd.
/*
/**********************************************************************/
/*
/* YKDEMO10 is a sample demonstration script of YKWTOMSG.
/* Using YKWTOMSG, a REXX script can pass a string to another script
/* through a MCS console.
/*
/* Summary of the procedure is following steps.
/*
1) Issuing YKQRYDEV to retrieve the volume information.
/*
2) Depending on result of YKQRYDEV, either USR000I or USR001E
/*
message will be written to MCS console by YKWTOMSG.
/*
If the command is terminated successfully, the script writes */
/*
USR000I message with some command device related attributes. */
/*
If the command is terminated abnormally, the script writes
/*
USR001E message with return code.
/*
/* To run the script, execute "START YKDEMO1S,DEVN=xxxx" from your
/* MCS console. YKDEMO1S is a sample cataloged procedure of BCM.
/* "xxxx" is device number of a volume. This value is passed to DEVN
/* parameter of YKQRYDEV. Specify the value to fit your environment.
/*
/**********************************************************************/
/* Beginning of sample script. */
/*
* Parse DEVN operand of YKDEMO1S cataloged procedure.
*/
parse upper arg "DEVN("op_devn")";
/*
* Retrieve a volume information in the storage system. DEVN
* operand is specified a device number of volume for input. STEM
* operand is specified a variable of volume information for output.
= " || DEMO_MSG.x.Text
= " || DEMO_MSG.x.Value
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
Command details 295
Advertisement
