HP XP P9500 Reference Manual page 138

Table 75 Contents of the Volume Query Information (CA) Panel (continued)
Item
4
Freeze SCP :
DIF UNIT
CONSLOST(P-S)
Other CopyPair
6
Information
138 ISPF Panels
Primary/Secondary Type
C/T ID
Description
be copied to S-VOL due to a problem such
as a failure.
STATUS: Places P-VOL in fence status
(updates suppressed) when updates in
P-VOL cannot be copied to S-VOL due to a
problem such as a failure. If the operation
from the primary site attains the suspend
status, updates to P-VOL are accepted.
NEVER: P-VOL is never in fence status
(updates suppressed). When a copy pair
is suspended, updates to P-VOL are
accepted.
Freeze the storage system (place in SCP status)
when a failure suspension (SUSPER) occurs.
Y: Places in SCP status.
N: Does not place in SCP status.
If one of the following conditions is satisfied,
N/A is displayed:
The consistency group ID is not registered
in the storage system.
The Open/MF Consistency Preservation
Function is not used.
Information cannot be acquired.
Unit of difference management
Whether data on the P-VOL and the S-VOL is
inconsistent (the CONSLOST status) due to the
copy process of the related Compatible
FlashCopy being interrupted during execution
of the Preserve Mirror function.
Y: Copy process of the related Compatible
FlashCopy was interrupted.
N: Normal status
This item is displayed in the format
P-VOL-status-S-VOL-status.
In either of the following cases, N/A is
displayed:
SIMPLEX is displayed for Status under both
Primary Volume and Secondary Volume.
The information cannot be obtained.
The following information is displayed if there
are any other copy pairs apart from the one
specified in the Copy Group Pair Status panel.
Copy type
Indication of whether it is information on
the P-VOL or S-VOL (Pri or Sec)
Consistency group ID and subconsistency
group ID
5, 1
5