HP XP P9500 Reference Manual page 199

SCU(cu-number) ~ <2-digit hexadecimal number>
If this parameter is specified, out of the logical paths within the path set stored in the path set
structure specified for the STEM parameter, inter-CU logical paths will be deleted in all cases where
the CU number of the RCU matches the value specified for this parameter. Inter-DKC logical paths
are not affected by this parameter.
If this parameter is not specified, the command deletes all inter-CU logical paths with nonshared
attributes unless another parameter is specified.
{FORWARD|REVERSE}
Specify the direction in which the logical path is to be deleted.
If neither is specified, the command will delete a bidirectional logical path.
FORWARD
The command deletes logical paths that are identified in the path set stored in the path set structure
specified by the STEM parameter, each of which is the forward logical path from the initiator node
defined by stem-name-specified-in-STEM-parameterPATH.n.Pri to the target node defined by
stem-name-specified-in-STEM-parameterPATH.n.Sec.
REVERSE
The command deletes logical paths that are identified in the path set stored in the path set structure
specified by the STEM parameter. Each path is a reverse logical path from the initiator node defined
by stem-name-specified-in-STEM-parameterPATH.n.Sec to the target node defined by
stem-name-specified-in-STEM-parameterPATH.n.Pri.
FORCE
If this parameter is specified, of those logical paths that are identified in the path set stored in the
path set structure specified by the STEM parameter, the command also deletes the paths that have
the shared attribute (those with the value Y assigned to
stem-name-specified-in-STEM-parameterPATH.n.Shared).
If this parameter is not specified, the command does not delete logical paths that have the shared
attribute.
TYPE({CU|DKC})
This parameter specifies the type (inter-CU logical path or inter-DKC logical path) of the logical
path to be deleted.
If neither this parameter nor any other parameters are specified, the command deletes all logical
paths.
CU
Out of the logical paths within the path set stored in the path set structure specified by the STEM
parameter, the logical paths that have CU set for
stem-name-specified-in-STEM-parameterPATH.n.type are deleted.
DKC
Out of the logical paths within the path set stored in the path set structure specified by the STEM
parameter, the logical paths that have DKC set for
stem-name-specified-in-STEM-parameterPATH.n.type are deleted.
Command details 199