Ykimport Command - HP XP P9500 Reference Manual

Table 1 1 1 YKH2B Command Return Code List
Return Code
0
4
8
44
48
64

YKIMPORT Command

Applies to Business Copy for Mainframe, Continuous Access Synchronous for Mainframe, Continuous
Access Synchronous for Mainframe with the HyperSwap attribute, Continuous Access Asynchronous
for Mainframe, and Continuous Access Journal for Mainframe.
Format
YKIMPORT
PREFIX(prefix)
1
BASEGROUP(copy group–ID)
1
NEWGROUP(copy group–ID)
1
[ CAPACITY({CHECK|NOCHECK})]
1
Function
This is a TSO/E command.
This command reads the following files and creates a copy group definition file:
Pair information CSV file
CSV file containing information on copy pairs in a CG container
EXCTG information CSV file
CSV file containing EXCTG information in a CG container with a 4x4 configuration (required
only when using an EXCTG)
Disk configuration definition file
Copy group definition file
Copy group definition file that defines attributes of a copy group to be created
Before you execute this command, allocate datasets for the CSV files under the following DD names
and catalog the files:
Pair information CSV file: INPAIR
EXCTG information CSV file: INEXCTG
Meaning
The command terminated normally. A copy group definition file was created.
The command terminated normally. No copy pairs were detected within the specified
device number range.
Although a copy group definition file was generated, undefined volume information
was detected in the disk configuration definition file at the site specified by the DAD
parameter for a pair that is within the range specified by the DEVN parameter.
Although a copy group definition file was generated, a change was detected in an
I/O configuration while the YKH2B command was being executed by omitting the
HS parameter or by specifying CHECK.
Although a copy group definition file was generated, a storage system that does not
support 2DC configurations with HyperSwap and CAJ was detected.
An I/O error occurred in a volume within the scan range. A copy group definition file
was created for the successfully detected volumes.
Termination due to processing errors. No copy group definition file was created.
Termination due to invalid parameters.
An error occurred during REXX processing.
Command details 215