Executing Ykload - HP XP P9500 Reference Manual

Table 62 Contents of the Manage Path Set Panel (continued)
Item
Description
1
xx is a return code from each command.
NOTE: Status displays the execution result of the action specified for AC. If you specify q for AC,
then the YKQRYPTH command is executed, and the status of each logical path that has been defined
in the path set is displayed in the Path Set Status panel. If you press the F3=Exit key to exit the Path
Set Status panel, Status in the Manage Path Set panel displays the execution result of the YKQRYPTH
command that was executed to display the Path Set Status panel.

Executing YKLOAD

When 1 is specified for the AC column in the Manage Path Set panel, the YKLOAD command (for
loading a path set) is executed. At this point, the LOAD Option panel is displayed for specifying
parameters for the YKLOAD command.
Figure 91 (page 106)
Figure 91 LOAD Option Panel (When Loading a Path Set)
The following table describes the items in the LOAD Option panel.
Table 63 Contents of the LOAD Option Panel When Loading a Path Set
Item
Path Set ID
Route List ID
Route Label
106 ISPF Panels
Description
LOADED: Loading the path set was successful.
Action-name SUCCESSFULLY: The action indicated by action-name was successful.
Action-name WARNINGS command-name RC= xx: A warning occurred with the
command indicated by command-name, in the action indicated by action-name.
Action-name WITH WARNINGS command-name RC=xx: The command indicated by
command-name within the action indicated by action-name generated an error
message.
Action-name ERRORS command-name RC= xx The command indicated by
command-name terminated with an error.
A description of the path set
shows the LOAD Option panel when a path set is loaded.
Description
Path set ID.
Specify the route list ID.
Specify the route label. Specify this item when you use a command device line with the route
label.
If a route label is specified, the information for the command devices with the specified route
label is loaded.