HP XP P9500 Reference Manual page 151

3
The timing for when the defined values are reflected is as described in
the table item of When effective.
4
Not displayed when the command has been executed for the HP XP1024/XP128 Disk Array.
5
For details about the status of the displayed copy pair, see the table (for CAJ) that shows the
copy pair statuses of volumes obtained by using the YKQRYDEV command, in the HP P9000 for
Business Continuity Manager Software Users Guide. Note that when the device is a command
device of either of the following models, CDEV(apid) is displayed in the Status column (apid:
APID):
HP XP12000/XP10000 Disk Array
HP XP24000/XP20000 Disk Array
HP P9500 Disk Array
6
If the emulation type of the journal volume is OPEN, JOURNAL is not displayed.
7
The following format shows the registration status of the restore journal group of the CAJ copy
pair in EXCTG:
status1(flag1,flag2) - status2(flag3,flag4), where:
status1: Indicates whether the journal group of the copy destination volume has
been registered in a storage system as EXCTG when a copy is being performed in
the forward direction. The characters displayed in status1 are determined according
to the values for flag1 and flag2 and status1 may have one of the following values:
active: The journal group has been registered in a storage system as EXCTG.
This copy pair is ready to be used by 4x4 CAJ in the forward direction.
inactive: The journal group has not been registered, a registration error
occurred or the user added information later. This copy pair is not ready to be
used by 4x4 CAJ in the forward direction.
invalid: Invalid status
N/A: Unable to identify the status.
flag1: Indicates, by using a flag, whether the journal group of the copy destination
volume has been registered in a storage system as EXCTG when a copy is being
performed in the forward direction. This information is held by the copy source
volume and flag1 may have one of the following values:
0: The journal group has not been registered in a storage system as EXCTG.
1: The journal group has been registered in a storage system as EXCTG.
N/A: Unable to identify the status.
flag2: Indicates, by using a flag, whether the journal group of the copy destination
volume has been registered in a storage system as EXCTG when a copy is being
performed in the forward direction. This information is held by the copy destination
volume and flag2 may have one of the following values:
0: The journal group has not been registered in a storage system as EXCTG.
1: The journal group has been registered in a storage system as EXCTG.
N/A: Unable to identify the status.
status2: Indicates whether the journal group of the copy destination volume has
been registered in a storage system as EXCTG when a copy is being performed in
Manage Copy Groups Panel (Copy Group Operation)
Table 48 (page 75), in
151