Sort Copy Group Container Panel - HP XP P9500 Reference Manual

Table 55 Contents of the Pair Selection List (Secondary) Panel (continued)
Item
SSID
CU
CCA
Cyls
1
The procedure to specify the range is the same as for specifying the pattern parameter for the SELECT command. For
details about how to specify the pattern parameter for the SELECT command, see
If the number of S-VOL devices selected does not match the number of P-VOL devices, this panel
remains ready to accept device selections until the number matches the number of P-VOL devices.
Once the number of selected devices matches the number of P-VOL devices, display transits to the
Copy Group Pair Detail panel.
You can use the SELECT command in the Pair Selection List (Secondary) panel. For details about
how to use the SELECT command, see
You can specify the following fields for a condition of the SELECT command:
Name of field
DEVN
VOLSER
If you omit the field name, DEVN will be set as a default value.

Sort Copy Group Container Panel

If you press the F6=Sort key in the Copy Group Detail Definition panel, the Sort Copy Group
Container panel for specifying the sorting order for the CG container is displayed.
Figure 75 (page 88)
Figure 75 Sort Copy Group Container Panel
88 ISPF Panels
Description
SSID
CU number
The two leftmost digits indicate the device CCA (in hexadecimal)
The rightmost digit indicates whether the CCA is an external volume.
+: External volume
: Not an external volume
(blank): The volume attribute is unknown because it could not be acquired
Device capacity (the number of cylinders)
"Command Line Commands" (page
Value in field
Device Number
Volume serial number
shows the Sort Copy Group Container panel.
"Command Line Commands" (page
11).
Type
Hexadecimal
Character string
11).