HP XP P9500 Reference Manual page 95

Figure 82 Extra Command Device Direct Operation Panel
Table 58 (page 95) describes the items displayed in the Extra Command Device Direct Operation
panel.
Table 58 Contents of the Extra Command Device Direct Operation Panel
Item
Route List ID
AC
Status
Device Address Domain ID
Serial Number
Devn
Description
Route list ID selected in the Manage Route panel
You can operate command devices on a DAD that includes command
devices defined in the displayed route list ID.
If you press the F5=Extra key without specifying a route list ID in the Manage
Route panel, the message *** Route List is not selected ***
will be displayed.
Specify an action.
q: Displays command device information registered in the storage system.
The Command Device Status panel is displayed.
d: Deletes command device information registered in the storage system.
The Command Device Status panel is displayed.
You need to specify all input columns to execute an action.
1
Results of the action
Del,nn: Displays the results (return code) of deletion processing for the
command device, in nn.
Qry,nn: Displays the results (return code) of display processing for the
command device information, in nn.
Specify the DAD ID, using alphanumeric characters (required).
Do not use hyphens.
If no route list ID is specified (that is, when this panel is displayed from the
Manage Route panel), operations can only be performed for local command
devices. In this case, you cannot overwrite DAD IDs that are already
displayed.
Specify the storage system serial number, using 5 digits of alphanumeric
characters (required).
Use a 4-digit hexadecimal to specify the device number of the command
device (required).
Manage Route Panel (Route Management) 95