Confirm Retry Of Configuration File Create Panel; Confirm Open/Mf Consistency Group Suspension Panel - HP XP P9500 Reference Manual

Figure 145 Confirm Route List Edit Panel
Pressing the Enter key changes the route list definition. Pressing the F12=Cancel key cancels the
changes to the route list definition.
If Y is specified and the Enter key is pressed, the route list definition is changed. If N is specified
and the Enter key is pressed, the route list definition is not changed. N is displayed from the
beginning.

Confirm Retry of Configuration File Create Panel

In defining copy groups, if an error occurs during creation of the configuration file, the Confirm
Retry of Configuration File Create panel is displayed asking you whether you want to create the
configuration file again.
If an error occurs during creation of the configuration file, an unusable configuration file might be
created. Therefore, HP recommends that you remove the cause of the error, and then create the
configuration file again.
For details about what actions to take when an error occurs during creation of the configuration
file, see the HP P9000 for Business Continuity Manager Software Users Guide.
Figure 146 (page 179)
Figure 146 Confirm Retry of Configuration File Create Panel
Pressing the Enter key creates the configuration file again. Pressing the F12=Cancel key displays
the Cancellation Warning panel.

Confirm Open/MF Consistency Group Suspension Panel

When you suspend an Open/MF consistency group, the Confirm Open/MF Consistency Group
Suspension panel is displayed, requesting confirmation of the suspension.
HP recommends that you first check whether suspending the open-system copy pairs is acceptable,
and then perform the suspension because open-system copy pairs contained in the same consistency
group are also suspended.
Figure 147 (page 180)
shows the Confirm Retry of Configuration File Create panel.
shows the Confirm Open/MF Consistency Group Suspension panel.
Confirmation Panels 179