HP XP P9500 Reference Manual page 251

elapsed, suspension will take place. In this case, data consistency is guaranteed, however, suspend
processing might be delayed.
GENID(generation-id) ~ <2-digit hexadecimal number><<00>>
Applies to Business Copy for Mainframe, Continuous Access Asynchronous for Mainframe.
Specify a generation ID. The default value (used when this parameter is omitted) is 00. Generation
IDs can be used as a generation number used for identifying the generation of backups.
For example, generation IDs are useful when you need to maintain consistency between multiple
storage systems. If you have specified different generation IDs for the volumes of individual storage
systems each time you set the ATTIME suspend time, all storage systems can be recovered from
the same volumes that have the same generation ID when the storage systems are recovered.
CANCEL
Applies to Business Copy for Mainframe, Continuous Access Asynchronous for Mainframe.
If this parameter is used, the ATTIME suspend time is canceled. This parameter is valid for copy
groups specified by consistency group ID.
For Cnt Ac-A Z, this parameter cannot be specified for a remote storage system.
251) shows the operation when the ATTIME suspend time that has been set for the CAA copy group
is canceled.
Table 130 Operation When the ATTIME Suspend Time Is Canceled in CAA
Target storage system
Storage system that is not
directly connected to a host
Storage system that is directly
connected to a host
When the copy type is BC and you do not use the CAJ ATTIME suspend function, do not specify
this parameter for a remote storage system or a copy group in which P-VOLs are Non Gen'ed
volumes. Table 131 (page
set for the BC copy group is canceled:
Table 131 Operation When the ATTIME Suspend Time Is Canceled in BC
Target storage system Setting of the ATTIME suspend time
or copy group
CAJ ATTIME
suspend time
Specified
Storage system that
is not directly
connected to a host
Copy group in
--
which the P-VOLs
are Non Gen'ed
volumes
Not specified
Setting of the ATTIME
suspend time
Specified
Not specified
Specified
Not specified
251)shows the operation when the ATTIME suspend time that has been
NORMAL ATTIME
suspend time
--
Specified
Not specified
Operation when the ATTIME suspend time
is canceled
The ATTIME suspend time is not canceled
because this operation cannot be performed
for a storage system (the return code is 48).
The ATTIME suspend time is canceled.
The ATTIME suspend time is not canceled
because it has not been set (the return code
is 0).
Operation when the ATTIME suspend time is
canceled
CAJ ATTIME suspend NORMAL ATTIME
time suspend time
The CAJ ATTIME --
suspend time is
canceled.
-- The NORMAL ATTIME
suspend time is not
canceled because this
operation cannot be
performed.
The CAJ ATTIME The NORMAL ATTIME
suspend time is not suspend time is not
Table 130 (page
1
Command details 251