Selecting How To Copy Originals - Kyocera TASKalfa 250ci Operation Manual

Copying Functions

Selecting How to Copy Originals

Select whether you wish to create individual copies on different size papers matching the original sizes or to
produce all copies on the same size papers.
NOTE:
This function is available regardless of whether originals have the same width or not.
The table below shows the finished document sizes for the different original size options.
Mixed Size Copies
Same Size Copies
Use the procedure below to copy mixed size originals.
Ready to copy.
Mixed Size Originals
Off
Mixed Size
Place original.
Copies
Same Size
Copies
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
4-10
Option
Originals are detected individually for size and
copied to the same size papers as originals.
Originals are all copied to the same size papers.
Copies
Original Width
Same Width Different
Width
Top Page Direction
Long Edge Short Edge
Left Left
Cancel OK
10/10/2008
Description
1
Press the Copy key.
2
Place originals on the document processor.
IMPORTANT: When placing originals of different
widths, be sure to flush them against the document
width guide toward the back of the machine.
3
Press [Org./Paper/Finishing] and then [Mixed Size
Originals].
4
Select [Mixed Size Copies] or [Same Size Copies]
as finish size.
10:10
5
Select the combination of originals from [Same
Width] and [Different Width].
When [Same Size Copies] is selected, select [Long
Edge Left] or [Short Edge Left] as the first original
orientation.
6
Press [OK].
7
Press the Start key to start copying.
OPERATION GUIDE