HP StorageWorks P9000 Manual page 92

Table 19 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKS0x) (continued)
Message ID
YKS086E MSG SC=44
RC=44 (file)
92 Messages
Message Text
File status is:DSSTATE
Explanation and Recommended Actions
The input configuration file identified by file is unavailable.
DSSTATE
Status of the input configuration file
The following messages are output if the attribute of the
input configuration file is abnormal:
DSORG = XX. DSORG must be YY
The file is unavailable because the DSORG attribute
value is abnormal. Therefore, delete the current
configuration file, and then create a new configuration
file that has correct file attributes.
RECFM = XX.RECFM must be YY
The file is unavailable because the RECFM attribute
value is abnormal. Therefore, delete the current
configuration file, and then create a new configuration
file that has correct file attributes.
LRECL = XX.LRECL must be YY
The file is unavailable because the LRECL attribute
value is abnormal. Therefore, delete the current
configuration file, and then create a new configuration
file that has correct file attributes.
BLKSIZE = XX.BLKSIZE must be YY
The file is unavailable because the BLKSIZE attribute
value is abnormal. Therefore, delete the current
configuration file, and then create a new configuration
file that has correct file attributes.
ALLOCATION FAILED
Creation of a configuration file failed. Check the free
device capacity and the available size of VTOC. For
details about the required device capacity for a
configuration file, see the HP StorageWorks P9000
for Business Continuity Manager Software Reference
Guide.
UNAVAILABLE DATASET
The configuration file is being used. Check the usage
of the configuration file.
XX displays the file attribute value that caused the error
and YY displays the correct file attribute value.
file
Name of the configuration file where
the error was detected