Table 9 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKL0x) (continued)
Message ID
YKL054E MSG
SC=36 RC=4
(file:rec#)
YKL074E MSG
SC=36 RC=36
(file:rec#)
YKL075W MSG
SC=4 RC=4
(file:rec#)
64
Messages
Message Text
Unexpected termination of
element: name
Invalid "&" character
discovered in quoted string.
string
Unrecognized Encoding
attribute value: value
Explanation and Recommended Actions
The XML element name that exists on the line with the line number
identified by rec# in the file identified by file has not been correctly
created.
Check the indicated line, and then identify the cause of the
problem by referring to information contained in the XML document
type definitions, in the HP StorageWorks P9000 for Business
Continuity Manager Software Reference Guide.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
An invalid entity reference was found on the line with the line
number identified by rec# in the file identified by file.
Use only defined entity references as specified in Extensible
Markup Language (XML) 1.0 at
http://www.w3.org
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
The system does not recognize the encoding attribute value of the
XML element that exists on the line with the line number identified
by rec# in the file identified by file.
Check the indicated line, and then identify the cause of the
problem by referring to information contained in the XML document
type definitions, in the HP StorageWorks P9000 for Business
Continuity Manager Software Reference Guide.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected