HP StorageWorks P9000 Manual page 216

Table 56 Details of Error Codes 7Fxx – 8Cxx (continued)
Error Error Details
Code
The command could not be executed
8CE8
because in the instruction to transfer
to a remote DKC, there is an error
in the parameter specification for the
host command.
The command could not be executed
8CE9
because the path for the remote DKC
control function is not set.
The command could not be executed
8CEB
because the path for the Remote
DKC Control Function is not set.
The command could not be executed
8CFB
because in the instruction to transfer
to a remote storage system, there is
an error in the storage system serial
number.
The command could not be executed
8CFC
because the command device is not
defined.
Table 57 Details of Error Codes 8Dxx
Error Error Details
Code
A path cannot be established
8D00
because there is an invalid
parameter.
The storage system serial
number is incorrect.
The SSID is incorrect.
The CU number is not
supported.
A path cannot be established
8D01
because there is an invalid
parameter. Alternatively, path
establishment is not supported.
A path cannot be deleted because
8D09
there is an invalid parameter.
Alternatively, path deletion is not
supported.
216 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z
Not output
Not output
Not output
Not output
Not output
Type of Error
BC Z Cnt Ac-S Z
Not output
Not output
Not output
TCA Cnt Ac-J Z CMD
Output
Output
Output
TCA Cnt Ac-J Z CMD
PATH Others
Output
Output
Not output
Not output
Not output
PATH Others
Output Not
output
Output Not
output
Output Not
output