HP StorageWorks P9000 Manual page 204

Table 51 Details of Error Codes 46xx (continued)
Error Error Details
Code
The CAJ ATTIME suspend time
466A
cannot be set. The reason might be
one of the following:
The specified time is earlier than
the consistency time.
The timer type remains Local
because the Cnt Ac-J Z copy pair
has not been resynchronized
after the timer type was changed
from Local to System.
When changing the timer type from
Local to System, you need to
suspend the Cnt Ac-J Z copy pair. If
the CAJ ATTIME suspend time has
already been set, perform the
following procedure to set the CAJ
ATTIME suspend time again.
Suspend the Cnt Ac-J Z copy pair.
Change the timer type.
Resynchronize the Cnt Ac-J Z copy
pair.
Set the CAJ ATTIME suspend time
again.
The CAJ ATTIME suspend time
466B
cannot be set because the C/T
group ID of the specified BC Z copy
pair is incorrect.
The CAJ ATTIME suspend time
4678
cannot be set because the specified
volume is not an BC Z copy pair or
the specified C/T group ID is not
matched.
The NORMAL ATTIME suspend time
467A
cannot be set because the CAJ
ATTIME suspend time has already
been set for the specified BC Z C/T
group.
The CAJ ATTIME suspend time
467B
cannot be set because the NORMAL
ATTIME suspend time has already
been set for the specified BC Z C/T
group.
The CAJ ATTIME suspend time
467C
cannot be set because a copy pair
that is not in the Duplex status is
included in the specified BC Z C/T
group.
A BC Z copy pair cannot be made,
4681
resynchronized, or suspended
because the CAJ ATTIME suspend
time has been set for the specified
BC Z C/T group.
204 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z TCA
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Cnt Ac-J Z CMD PATH
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Others