HP StorageWorks P9000 Manual page 65

Table 9 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKL0x) (continued)
Message ID Message Text
YKL076W MSG Unrecognized attribute: name
SC=4 RC=4 = value
(file:rec#)
YKL077W MSG APIInfo Level=level invalid.
SC=4 RC=4 Supported level is v.r.m.
(file:rec#)
YKL079E MSG YKVSET program failure for:
SC=44 RC=44 name = value
(result)
Explanation and Recommended Actions
The system does not recognize the XML attribute that exists on the
line with the line number identified by rec# in the file identified
by file.
Check the indicated line, and then identify the cause of the
problem by referring to information contained in the XML document
type definitions, in the HP StorageWorks P9000 for Business
Continuity Manager Software Reference Guide.
name
XML attribute name
value
XML attribute value
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
The system does not recognize the Level attribute level of the
APIInfo element that exists on the line with the line number
identified by rec# in the file identified by file.
Check the indicated line, and then identify the cause of the
problem by referring to information contained in the XML document
type definitions, in the HP StorageWorks P9000 for Business
Continuity Manager Software Reference Guide.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
v.r.m
API level
For details about this value, see the information
about the XML document type definitions in the
HP StorageWorks P9000 for Business
Continuity Manager Software Reference Guide.
An attempt to assign the value value to the variable name failed
with the result value identified by result. This error can be caused
by an invalid value being specified for the STEM parameter.
List of Messages 65