HP StorageWorks P9000 Manual page 125

Table 34 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKY7x) (continued)
Message ID
YKY730E XML
YKY999E TSO CON
Table 35 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ0x)
Message ID
YKZ000T TSO SC=48
YKZ001E TSO MSG
SC=48
YKZ002E MSG SC=48
YKZ003E MSG SC=48
YKZ004E MSG SC=48
YKZ008E MSG SC=48
YKZ010E MSG SC=48
YKZ050E MSG SC=36
#
RC=36 (attribute-value)
Message Text
INVALID CT Group is specified.
MFAgent cannot use this REXX exec
library.
Message Text
Supplied parameters invalid
No parameter-name() supplied
parameter-name() does not include
trailing "."
parameter-name() value invalid
Device# DEVN() is not found.
parameter-name() not valid hex
REXX failure return code=nnnn
starting with variable name
Invalid attribute name
Explanation and Recommended Actions
The specified consistency group is invalid.
Make sure that the specified consistency group exists
in the copy group definition file.
A REXX script that cannot be used by Mainframe
Agent was executed.
Check the REXX Exec library connected to SYSEXEC
dd name.
Explanation and Recommended Actions
Invalid parameters were specified.
For details, see the reason code in the YKZ099I
message displayed after this message. For more
information about reason codes, see IKJPARS in the
TSO/E Programming Services.
Nothing is assigned to the parameter identified by
parameter-name.
The last character of the string assigned to the
parameter identified by parameter-name is not a
period.
The value assigned to the parameter identified by
parameter-name is invalid.
The device specified in the DEVN parameter does not
exist, or a device other than DASD or a PAV ALIAS
volume has been specified.
The value specified in the parameter identified by
parameter-name is not in hexadecimal format.
An attempt to access the REXX variable identified by
name has failed.
For details about the return code, see IKJCT441 in the
TSO/E Programming Services.
nnnn
Error code returned upon REXX
access
The value of the REXX variable whose name is
identified by name is invalid.
Correct the value and then re-execute the command.
name
REXX variable name
attribute-value
REXX variable value
#
If this message is output while the YKLOAD command
is being executed, the RC is 44.
List of Messages 125