HP StorageWorks P9000 Manual page 33

Table 2 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKA0x) (continued)
Message ID Message Text
YKB102E TSO Error occurred during
execution.
Cmd=command-name
msg=message-text:
message-value:
message-severity
YKB200W TSO No information was
acquired for
DEVN=device-number
YKB201W TSO No I/O paths are available
for the specified devices.
DEVN=Devn
Explanation and Recommended Actions
An error occurred during execution of the YKP2B command.
See the explanation corresponding to the message ID of the error
message indicated by message-text and take appropriate action.
Also see the additional information indicated by message-value
and message-severity again, take appropriate action. If the problem
is not resolved, contact an HP service representative.
command-name
CLI command name
message-text
Error message
message-value
Additional information about the error message
If no additional information is available, a space
is displayed.
message-severity
Additional information about the error message
If no additional information is available, a space
is displayed.
The error messages message-text, message-value, and
message-severity are displayed in the TSO/E terminal. Depending
on the length of the error messages, they might extend over several
lines.
No copy pair information was acquired from the volume to which
the device number was assigned.
There might not be a volume for the specified device number. If the
volume exists for the specified device number, check the channel
settings.
device-number
Device number assigned to the volume from
which no copy pair information was acquired
No copy pair information was acquired from the volume to which
the device number Devn was assigned because no I/O paths are
available. Verify the I/O path settings.
Devn
The device number of the volume whose
information acquisition was skipped
List of Messages 33