HP StorageWorks P9000 Manual page 67

Table 9 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKL0x) (continued)
Message ID Message Text
YKL085E MSG Unable to read configuration
SC=40 RC=40 (file) file.
YKL087E MSG The license information
SC=40 RC=40 (file) dataset could not be read.
YKL088E MSG File Open error: dsstate.
SC=40 RC=40 (file)
YKL089E MSG File Close error: dsstate.
SC=40 RC=40 (file)
YKL090E MSG File Allocation Failed: dsstate.
SC=40 RC=40 (file)
YKL091E MSG File Deallocation Failed:
SC=40 RC=40 (file) dsstate.
Explanation and Recommended Actions
The configuration file could not be read, because the record length
is too long.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file file where the
error was detected
An attempt to read the license information dataset has failed.
Check that the dataset name of the license key dataset is correct,
and that the license key dataset was created correctly. If necessary,
transfer the license key file again and recreate the license key
dataset.
An attempt to open the XML file identified by file failed.
dsstate
Status of the input XML
file
file Name of the XML file where the error was
detected
An attempt to close the XML file identified by file failed.
dsstate
Status of the input XML
file
file Name of the XML file where the error was
detected
An attempt to allocate the XML file identified by file failed. Verify
that the XML file identified by file is correctly created.
dsstate
Status of the input XML
file
file Name of the XML file where the error was
detected
An attempt to deallocate the XML file identified by file failed.
dsstate
Status of the input XML
file
file Name of the XML file where the error was
detected
List of Messages 67