HP StorageWorks P9000 Manual page 202

Table 51 Details of Error Codes 46xx (continued)
Error Error Details
Code
The command device cannot be
461E
defined. The reason might be one
of the following:
The command device is executing
a remote control command.
The volume is part of a Cnt Ac-S
Z or TCA copy pair.
The command device cannot be
461F
deleted. The reason might be one of
the following:
The command device is executing
a remote control command.
The volume is part of a Cnt Ac-S
Z or TCA copy pair.
The command could not be executed
4621
because the remote DKC Control
Function is not supported.
The command could not be executed
4630
because the 3-site function is not
supported.
A Cnt Ac-J Z copy pair status cannot
4633
be changed because an attribute of
the P-VOL or S-VOL differs from the
actual volume attribute. The
command might have failed because
the YKQUERY command was not
executed in advance.
The command device could not be
4639
defined because the specified
volume is a Cnt Ac-J Z copy pair
volume or journal volume.
Due to either of the following
463C
reasons, CAJ ATTIME suspensions
cannot be scheduled in Quick mode:
The storage system does not
support the CAJ ATTIME suspend
function in Quick mode.
The microcode of the storage
system is currently being changed
to one that supports the CAJ
ATTIME suspend function in
Quick mode.
A Cnt Ac-S Z or TCA copy pair
4645
status cannot be changed because
a logical path has not been
established between the P-VOL and
S-VOL.
TCA copy pair operations cannot be
4649
performed because the specified
storage system does not support
TCA.
202 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z TCA
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not Output
output
Not output Output
Cnt Ac-J Z CMD PATH
Output Not output
Output Not output
Not output
Output Not output
Output Not output
Output Not output
Not output
Not output
Others
Output
Output