HP StorageWorks P9000 Manual page 109

Table 30 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKY0x) (continued)
Message ID
YKY016I CON
YKY018I CON
YKY019I CON
YKY020I CON
YKY021I CON
YKY022I CON
YKY051I CON
YKY052I CON
YKY053I CON
Message Text
TASK(task-ID) ABENDED,CODE=
completion-code
MODULE(load-module-name)
NOT FOUND
dd-name DD STATEMENT NOT
FOUND
THE PROFILE IS NOT DEFINED
IN THE FACILITY CLASS OF
RACF: xxxxxxxx
A NAME/TOKEN WRITE ERROR
OCCURRED,
RC=return-code,
NAME=name
THE SPECIFIED PREFIX IS BEING
USED BY ANOTHER PROGRAM
AGENT ENDED
AGENT IN SCHEDULED
SHUTDOWN
AGENT ABENDED
Explanation and Recommended Actions
A task terminated abnormally during the agent start
up. The Business Continuity Manager agent will be
terminated.
task-ID
Name of the task
completion-code
System completion code
The load module shown as load-module-name was
not found. The Business Continuity Manager agent
will be terminated.
Make sure that the indicated load module was
installed correctly.
The DD statement shown as dd-name is missing. The
Business Continuity Manager agent will be terminated.
Specify the DD statement in the cataloged procedure
used for starting the Business Continuity Manager
agent and then restart the agent.
The STGADMIN.YKA.BCM.YKQUERY or
STGADMIN.YKA.BCM.COMMANDS profile is not
defined in the FACILITY class of the RACF. Review the
RACF settings and then restart the Business Continuity
Manager agent.
xxxxxxxx
Maintenance information
The command cannot be executed because a
NAME/TOKEN write error occurred. The Business
Continuity Manager agent will now stop.
return-code
Return code set by the
NAME/TOKEN registration
routine(IEANTCR)
name
Name registered in the
NAME/TOKEN service
The specified prefix is being used by another program.
Check the initialization parameters.
The Business Continuity Manager agent was
terminated.
The Business Continuity Manager agent termination
processing has begun.
The Business Continuity Manager agent terminated
abnormally.
If the cause is unknown, collect the ABEND dump in
the SYSABEND dump format and then contact customer
support for investigation.
List of Messages 109