HP StorageWorks P9000 Manual page 249

Table 65 Details of Error Codes EAxx
Error Error Details
Code
The Cnt Ac-J Z copy pair cannot
EA00
be operated for each EXCTG
because of the following reasons:
The JNLG specified in the copy
group is not registered in the
EXCTG.
There is a copy pair whose
status is TRANS.
A Cnt Ac-J Z copy pair cannot be
EA01
made for either of the following
reasons:
An attempt was made to make
a copy pair that already exists.
The specified P-VOL or S-VOL
for that Cnt Ac-J Z copy pair is
already in use by another
copy pair.
A Cnt Ac-J Z copy pair cannot be
EA02
made because the specified
volume comprises an M-JNL
group.
A Cnt Ac-J Z copy pair cannot be
EA07
made because the number of
copy pairs that can be registered
in the specified M-JNL group has
exceeded the maximum limit.
A Cnt Ac-J Z copy pair cannot be
EA08
made because the number of
copy pairs that can be registered
in the specified R-JNL group has
exceeded the maximum limit.
A Cnt Ac-J Z copy pair cannot be
EA09
made because the M-JNL group
is not in the Initial, Active, or Stop
status.
A Cnt Ac-J Z copy pair cannot be
EA0A
made because the status of the
R-JNL group is incorrect.
The Cnt Ac-J Z copy pair could
EA12
not be resynchronized in the
reverse direction because the
copy pair is not in the
SWAPPING status.
A Cnt Ac-J Z copy pair cannot be
EA13
resynchronized because the
volume specified for the P-VOL is
the S-VOL of the Cnt Ac-J Z copy
pair.
A Cnt Ac-J Z copy pair cannot be
EA15
resynchronized because the
volume specified for the S-VOL is
the P-VOL of the Cnt Ac-J Z copy
pair.
Type of Error
BC Z Cnt Ac-S Z
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
TCA Cnt Ac-J Z CMD
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Details of Error Codes 249
PATH Others