HP StorageWorks P9000 Manual page 219

Table 57 Details of Error Codes 8Dxx (continued)
Error Error Details
Code
A BC Z copy pair cannot be made
8D1D
or resynchronized. Possible reasons
include one or more of the
following:
The S-VOL is online.
The status of the copy pair does
not allow the status transition.
For details, see error code
2310.
The P-VOL is online.
The charging limit of the
program product was
exceeded.
The copy pair is in the Pending
status.
The copy pair is not in the Split
status.
The specified C/T group ID is
not registered.
The number of copy pairs in the
specified C/T group ID exceeds
the maximum number.
The serial numbers for the primary
8D1E
and the secondary storage systems
in the host command parameter is
incorrect.
The host command parameter is
8D20
incorrect.
The command cannot be executed
8D21
because the volume specified by
the host command parameter is in
the NOT READY status.
The command cannot be executed
8D22
because the logical volume of the
volume specified by the host
command parameter is blocked.
The command could not be
8D25
executed because the Cnt Ac-S Z,
TCA, or BC Z program product is
not installed.
Type of Error
BC Z Cnt Ac-S Z
Output Not output
N N
Output
Not output
Not output
Output
TCA Cnt Ac-J Z CMD
N N N
Not output
Output
Output
Not output
Details of Error Codes
PATH Others
N Y
Not output
Not output
219