HP StorageWorks P9000 Manual page 107

Table 29 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKX2x) (continued)
Message ID
YKX201E MSG SC=48
YKX201E MSG SC=48
YKX202E TSO RC=48
YKX202E MSG SC=48
YKX203E MSG SC=48
YKX204E MSG SC=48
YKX208E MSG SC=48
YKX208E MSG SC=48
YKX208E MSG SC=48
YKX210E TSO RC=40
YKX266E MSG SC=48
YKX299I TSO
Message Text
No serial# SN() supplied
No serial# SSN() supplied
Messages MSG(stem) does not
include trailing "."
Results STEM(stem) does not
include trailing "."
Parameter combination is invalid
Device# DEVN() is not found
CCA() not valid hex
CU() not valid hex
DEVN() not valid hex
REXX failure return code=nnnn
starting with variable name
Necessary Route List is not found.
YKQRYDEV command return
code=nnnn, reason code=rrrr
Explanation and Recommended Actions
Nothing is assigned to the SN parameter.
Nothing is assigned to the SSN parameter.
The last character of the MSG parameter is not a
period.
stem
Stem name assigned to the MSG
parameter
The last character of the STEM parameter is not a
period.
stem
Stem name assigned to the STEM
parameter
The specified parameter combination is invalid.
For details about the combination of parameters, see
the description of the YKQRYDEV command in the HP
StorageWorks P9000 for Business Continuity Manager
Software Reference Guide.
The device specified in the DEVN parameter does not
exist, or a device other than DASD or a PAV ALIAS
volume has been specified.
The value specified in the CCA parameter is not in
hexadecimal format.
The value specified in the CU parameter is not in
hexadecimal format.
The value specified in the DEVN parameter is not in
hexadecimal format.
Access to the REXX variable identified by name failed.
For details about the return code, see IKJCT441 in the
TSO/E Programming Services.
nnnn
Error code returned upon REXX
access
The route list to be processed was not found.
Review the ROUTE and DAD parameters, route list
definition file, and command device definition file you
specified when executing the YKLOAD command.
The YKQRYDEV command terminated with the return
code nnnn and the reason code rrrr.
List of Messages 107