HP StorageWorks P9000 Manual page 122

Table 33 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKY6x) (continued)
Message ID
Table 34 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKY7x)
Message ID
YKY703E XML
YKY704E XML
YKY705E XML
YKY706E XML
YKY707E XML
YKY713E XML
YKY714E XML
122 Messages
Message Text
Message Text
XML translation error: The sent entity
is not XML.
End of request was detected in the
comment.
End of request was detected in an
element.
The number of elements exceeded
the allowed limit.
The request version is a mismatch.
An invalid element 'element-name'
was specified in the XML request.
An invalid parameter
'parameter-name' was specified in
the XML request element
'element-name'.
Explanation and Recommended Actions
pppppppp pppppppp
PSW during the abnormal
termination
ll
Length of command during the
abnormal termination
xx
Interrupt code during the abnormal
termination
Explanation and Recommended Actions
This is an XML error. The sent entity is not XML.
Check, and, if necessary, revise the request coding.
The end of the XML request was detected in the
comment.
Check, and, if necessary, revise the comment.
The end of the XML request was detected in an
element.
Check, and, if necessary, revise the last element in
the XML request.
The number of element hierarchies exceeded the
permitted maximum value (16).
Check, and, if necessary, revise the request.
The API version of the XML request is not supported.
Make sure that the version is supported by the Business
Continuity Manager agent.
An invalid element-name was specified in the XML
request.
Check, and, if necessary, revise the specified request.
element-name
Element name
An invalid parameter-name was specified in the XML
request element element-name.
Check, and, if necessary, revise the specified request.
element-name
Element name
parameter-name
Parameter name